|
|
|
Download
Data Sheet
|
|
MAJOR
FEATURES |
|
|
Supports both 1.0625 and
2.125 Gbps data rates
|
|
|
Host-independent Java
client provides the industry´s only platform-independent,
network-attached analyzer
|
|
|
Supports simultaneous
data access by multiple users located anywhere in the
world
|
|
|
Deepest trace memory in
the industry (up to 4 GBytes)
|
|
|
Data capture speed
exceeds 540 MB/s in native 10B format
|
|
|
Supports all three modes
of data retransmission: buffering, repeating and
reclocking (user-selectable)
|
|
|
High-speed
hardware-assisted WarpSearch™ engine searches large data
files within seconds
|
|
|
Immediate view of
recorded data from trace memory (no need to wait for
internal pre-processing or "decode" operations)
|
|
|
Programmable multilevel
hardware triggers and filters
|
|
|
ChannelTrack™
performance analysis system monitors network performance
and identifies network problems
|
|
|
|
|
Ancot's FCAccess 2000A provides a
complete protocol analysis and network performance test system
for 1.0625 and 2.125 Gbps Fibre Channel.
The FCAccess 2000A continues the revolutionary new standard
established by the FCAccess 1000. FCAccess is the first
network-attached analyzer for Fibre Channel. Using
client-server architecture, the Java-based FCAccess client
allows the analyzer to run on virtually any host computer system
(e.g., Solaris, UNIX, Windows, etc.). Multiple
clients may control the analyzer and/or view data
simultaneously. The analyzer can be completely controlled
and operated from any location in the world via IP (e.g.,
Ethernet, Internet) access.FCAccess introduces a revolutionary
new design for Fibre Channel test instrumentation that provides
the user with unprecedented power and flexibility.
FCAccess features a client/server architecture with
host-independent (Java-based) clients that can run on virtually
any host computer (not just a PC). The FCAccess client
provides the ability to easily design complex triggers and
filters, to completely control the system and to analyze the
trace recordings. As with other systems, the client can
run on the local CPU to provide a fully-integrated, stand-alone
analyzer, but the real power of client/server architecture is
the ability to run the analyzer entirely from remote locations.
This allows the development engineer to maintain an integrated
development environment within a single desktop workstation.
Access to the server is possible over any IP network, such as
Ethernet and Internet. Multiple users may access the
server simultaneously, allowing concurrent sharing and
collaborative diagnosis and problem-solving for
geographically-distributed workgroups.
|
FCAccess 2000A provides the
industry's most advanced Fibre Channel traffic capture
capability. FCAccess captures all FC traffic at 1.06Gb and
2.12Gb data rates in native 10B format, at acquisition rates
exceeding 540 MB/s. FCAccess also provides by far the
deepest trace memory in the industry (up to 4 GBytes), to enable
recording of long traffic sequences.
Long trace recordings are useless without the ability to quickly
search and find the data you want. FCAccess provides
WarpSearch™, an advanced hardware-based data search engine
that locates critical data within seconds.
With access over Ethernet or Internet, powerful hardware
triggering, capture and data filter capability, and
hardware-assisted searching, FCAccess is a revolutionary new
productivity tool for engineers who design, maintain, optimize
or troubleshoot Fibre Channel systems.
|
|
|
SYSTEM
SPECIFICATIONS
|
|
Standard
Hardware Features
|
ChannelTrack
Performance Analysis
|
- Deep trace buffer
(512 MB, 1 GByte, 2 GBytes or 4 GBytes)
- Data acquisition rates
>540 MBytes/s
- Full data capture in native
10B format
- WarpSearch™
hardware-assisted data search engine (patent pending)
- Supports multiple
retransmission modes: buffering, repeating and
reclocking (user-selectable)
- Interchangeable SFP media
interfaces (Copper, LC 850nm multimode fiber, or LC 1310nm
singlemode fiber)
FCAccess
Server Features
- Supports full instrument
control and data access via IP protocol (Ethernet/Internet
access)
- 10/100baseT Ethernet
interface
- Supports WarpSearch™
access from any client
- Supports simultaneous
access by multiple clients
- C programming API available
for custom test development
FCAccess
Client Features
- Host-independent
(Java-based) client runs on many CPUs
- Provides full system setup,
control and data analysis
|
- Real-time measurement and
monitoring of critical performance parameters (data transfer
rates, link utilization, error analysis, frame size
profiling, etc.)
ChannelSync™
Multichannel Synchronization
- Real-time synchronization,
inclusing triggering capability, between all channels and
between all analyzers
System
Upgrades
- Economical system upgrades
to the new FCAccess 2000A are available for all users of
existing Ancot FC analyzers
Configuration
Options
- Copper, multimode fiber or
singlemode fiber interfaces
- 512 MB, 1, 2 or 4 GBytes
trace buffer
- Briefcase (portable),
Lunchbox (portable), minitower or server configurations
Warranty
- Three years, parts and
labor
|
|
|
